3″ MAX. Adjustability IC Airtight New Construction Housing

Construction: ​​

• IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.

Installation

Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength swivel hanger bars can easily be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

Junction Box

Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

Hanger Bars

Pre-installed swivel hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

Electrical

• Input Voltage: 120/277V AC. • Inherently protected.

Emergency Backup

The fixture becomes 120V only.

Dimmability

• Dimmability based on lamp.

Lamp

Designed for use with ELCO 3" PEX Diecast Trims and KotoTM LED module

Warranty

ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.