24V DC 4″ New Construction IC Airtight Housing

Construction: ​​

• Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information. (For trimless applications only: access above the ceiling is required for servicing the fixture after installation.)

Junction Box

Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

Hanger Bars

Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

Lamp

Designed for use with ELCO 24V DC Koto Module and trims.

Warranty

ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.