6″ Shallow New Construction IC Airtight Housing
Dimensions
24W MAX · New Construction · 3 item numbers · Lamp: Designed for use with ELCO 6" LED inserts, LED modules, or PSA37 with 6" MR16 trims
Item numbers ↓Dimensions
1 drawing · click to open full size
Item numbers
3All 3 are the same item. Lamp type, voltage, dimming and emergency option change.
| Item number | Lamp Type | Voltage | Dimming | Emergency Option | Drawing |
|---|---|---|---|---|---|
| EL760ICA | LED | 120-277V | Triac/ELV | — |  |
| EL760ICA-7 | LED | 277V | — | — | — |
| EL760ICA-EM5 | — | 120-277V | Triac/ELV | Emergency Battery Backup | — |
Details
- IC Airtight for direct contact with insulation.
- Transformer (EL760ICA-7 only): 277V to 120V step-down transformer.
- Meets Title 24 JA8-2025-E requirements. Meets ENERGY STAR® requirements.
- Trims and inserts sold separately.
Construction:
• Shallow Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 6 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts. Pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
• Input Voltage: 120V AC. • Inherently protected.
Trims
Compatible with ELCO 6" LED Inserts.
Dimmability
Dimmability based on lamp.
Lamp
Designed for use with ELCO 6" LED inserts, LED modules, or PSA37 with 6" MR16 trims.
Listings
• UL Listed (US and Canada) for Damp Location/Wet Location with select trims. • UL Listed (US and Canada) for Feed Through. • UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. • Airtight per ASTM E-283. • Install a JA8-2025-E lamp for Title 24 Compliance.
Warranty
ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.
Works with
Light Engines
Light Engines that go with this housing
