Skip to content
ELCO Lighting
EL770ICDXA6″ 0-10V IC New Construction Dedicated LED Housing6″ 0-10V IC New Construction Dedicated LED Housing6″ 0-10V IC New Construction Dedicated LED Housing
1/4

Finish

The DX Koto™ System
DX Koto™ SystemHOUSING

6″ 0-10V IC New Construction Dedicated LED Housing

Spec Sheet

120-277V · 0-10V/Triac/ELV · New Construction · 2 emergency options · Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

2

Both 2 are the same item. Emergency option changes.

Item numberEmergency OptionDrawing
EL770ICDXA—
EL770ICDXA-EM5Emergency Battery Backup—

Details

  • Wired for 0-10V Dimming
  • Single Wall IC Airtight rated for direct contact with insulation
  • 120/277V Input 
  • Meets restricted air flow requirements (per ASTM E-283)
  • UL Listed (US and Canada) for direct contact with insulation
  • UL Listed (US and Canada) for wet locations with wet location inserts
  • UL Listed (US and Canada) for feed through
  • CA Title 24 compliant
  • Compatible with the Poplar™ LED Module

  • Construction

    Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Steel housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 6 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts. Pry-out knockout slots. 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

  • Electrical

    Input Voltage: 120/277V. Inherently protected. Fixture rated for 24W MAX. LED insert

  • Trims

    Compatible with ELCO 6" 0-10V LED Inserts and 0-10V Koto™ Module.

  • Dimmability

    Dimmability based on insert used.

  • Listings

    UL Listed (US and Canada) for Damp Location. UL Listed (US and Canada) for Wet Location with select trims. UL Listed (US and Canada) for Feed Through. UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. Airtight per ASTM E-283. JA8-2025-E Title 24 Compliant.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.

Works with

Light Engines

Light Engines that go with this housing

Part of these families

3 families

Downloads