Skip to content
ELCO Lighting
EL570ICA5″ Dedicated LED IC Airtight New Construction HousingArchello Awards 2023 Longlisted
1/3
LED Dedicated Housings & Inserts
LED Dedicated Housings & Inserts SystemHOUSING

5″ Dedicated LED IC Airtight New Construction Housing

Spec Sheet

New Construction · 3 item numbers · Lamp: Designed for use with ELCO 5" LED inserts, LED modules, or PSA37 with 5" MR16 trims

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

3

All 3 are the same item. Wattage, voltage and emergency option change.

Item numberWattageVoltageEmergency OptionDrawing
EL570ICA24W120-277V—
EL570ICA-724W277V → 120V——
EL570ICA-EM515W MAX120-277VEmergency Battery Backup—

Details

  • Single wall IC construction, for use in insulated ceilings.
  • CA Title 24 JA8-2025-E compliant (as high efficiency luminaire).
  • Trims sold separately.
  • Lamp: 24W Max 120V.
  • cUL Listed for damp location and for feed through.
  • Compatible with ELCO 5" LED Inserts.

  • Construction: ​​

    • Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x8 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 5 1/2". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

  • Electrical

    Input Voltage: 120V AC. Inherently protected.

  • Emergency Backup

    The fixture becomes 120V only.

  • Dimmability

    Dimmability based on lamp.

  • Lamp

    Designed for use with ELCO 5" LED inserts, LED modules, or PSA37 with 5" MR16 trims.

  • Listings

    • UL Listed (US and Canada) for Damp Location. • UL Listed (US and Canada) for Wet Location with select trims. • UL Listed (US and Canada) for Feed Through. • UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. • Airtight per ASTM E-283. • Install a JA8-2025-E lamp for Title 24 Compliance.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.

Part of these families

2 families

Downloads