Skip to content
ELCO Lighting
E45KT4″ Tunable White Koto™ IC Airtight Housing4″ Tunable White Koto™ IC Airtight Housing4″ Tunable White Koto™ IC Airtight Housing
1/4
4″ Tunable White Koto™
Tunable White Koto™ SystemHOUSING

4″ Tunable White Koto™ IC Airtight Housing

Spec Sheet

LED · 120-277V AC · 0-10V · IC Airtight · Dual 0-10V · 2 item numbers · Double Wall IC Rated for direct contact with insulation

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

2

Both 2 are the same item. Wattage and lumens change.

Item numberWattageLumensDrawing
E45KT10ICAD14W1000 (14W)—
E45KT12ICAD18.3W1250 (18.3W)

Details

  • IC Airtight for direct contact with insulation.
  • 120/277V AC/50-60Hz universal input voltage
  • Smooth, flicker-free dimming and CCT tuning
  • Dims down to 1% with a compatible dimmer
  • E45KT10 (1000 lm, 14W)
  • E45KT12 (1250 lm, 18.3W)
  • Control Modules Ordered Separately
  • Damp location rated and wet location rated for wet location trims

  • Construction

    Double Wall IC Rated for direct contact with insulation. For use in IC and Non-IC conditions. Up to 1250 lumens. Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists. Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information. For use with ELCO Tunable White Koto™ LED Light Engines (ELK19TWD Series)

  • Junction Box

    Positioned to accommodate straight conduit runs. Two 3/4” knockouts, Seven 1/2” trade size conduit knockouts, One 3/8" knockout. Four Pry-out knockout slots for easy romex installation.

  • Hanger Bars

    Pre Installed hanger bars with True Nail easy installation in regular lumber, engineered lumber, and Laminated Beams. Integral T-bar slots for easy installation in T-Bars. Spans up 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while easily aligning the housings with the joists.

  • Electrical

    Driver is rated for 120V and 277V input (120/277V). High Efficiency driver with a power factor > 0.95.

  • Dimmability

    Dual Channel 0-10V dimming. 0-10V dimming down to 1% with a compatible dimmer. For a full list of dimmers refer to the Dimmer Compatibility List.

  • Warranty

    ELCO Products are built to last. 5-year Limited warranty

Part of these families

1 family

Downloads