Skip to content
ELCO Lighting
EL1499LDICA4″ New Construction IC Housing4″ New Construction IC Housing
1/3

Finish

4″ Low Voltage GU5.3 Housings and Trims
Alpine™ SystemHOUSING

4″ New Construction IC Housing

Spec Sheet

GU5.3 BiPin · 12W · 120V · New Construction · 2 transformer type options · Lamp: Designed for use with GU5.3 MR16 LED lamps

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

2

Both 2 are the same item. Transformer type changes.

Item numberTransformer TypeDrawing
EL1499LDICAMagnetic Transformer
EL1499LDICEAElectronic Transformer—

Details

  • Single wall IC construction, for use in insulated or non-insulated ceilings.
  • Dimmable.
  • Lamp: 12V, MR16 GU/GX5.3 bi-pin LED (not included).
  • Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
  • Trims sold separately.

  • Construction: ​​

    • Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

  • Electrical

    • Input Voltage: 120V AC. • Output Voltage: 12V AC. • Magnetic or electronic transformer available. • Thermally protected against improper lamping.

  • Trims

    Compatible with ELCO 4" MR16 trims.

  • Dimmability

    • Magnetic transformer dims with MLV type dimmers. • Electronic transformer dims with ELV type dimmers. • See dimming compatibility list for a full list of compatible dimmers. • Note: Lamp used may affect dimmability.

  • Lamp

    Designed for use with GU5.3 MR16 LED lamps.

  • Listings

    UL Listed (US and Canada) for Damp Location. UL Listed (US and Canada) for Wet Location with select trims. UL Listed (US and Canada) for Feed Through. UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. Airtight per ASTM E-283. Install a JA8-2025-E lamp/luminaire for Title 24 Compliance.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years.

Part of these families

1 family

Downloads