Skip to content
ELCO Lighting
4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch
1/6

Finish

Ply™ System
Ply™ SystemCANLESS LED

4″ LED High Lumen Round Reflector Insert with 5-CCT Switch & 5-Lumen Switch

Spec Sheet

LED · 12W, 15W, 18W, 22W, 25W · 2700K-5000K · 120-277V · 0-10V/Triac/ELV · 80° · 6 item numbers · IC rated driver and fixture are tested and approved for direct contact with insulation

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

6

All 6 are the same item. Finish and emergency option change.

Item numberFinishEmergency OptionIES file
ERT475CT5DHHaze—.ies
ERT475CT5DH-EMHazeUp to 25W Emergency Battery—
ERT475CT5DHWHaze with White Ring—.ies
ERT475CT5DHW-EMHaze with White RingUp to 25W Emergency Battery—
ERT475CT5DWWhite—.ies
ERT475CT5DW-EMWhiteUp to 25W Emergency Battery—

Details

  • IC Airtight for use with direct contact to insulation.
  • Designed to fit in plenums as shallow as 3″.
  • Eliminates the need for housing.
  • Lumens (Wattage): 1000 lm (12W), 1250 lm (15W), 1500 lm (18W), 1800 lm (22W) or 2000 lm (25W)
  • 80° Standard beam angle.
  • OPTIONAL mounting frame available.
  • Remodel applications require no additional accessories.
  • 90+ CRI color rendering.
  • Wet Location allows for use indoors or outdoors.
  • Energy Star Certified, Title 24 JA8-2025-E Compliant.
  • Includes driver and Jbox.
  • Optional emergency battery backup available.

  • Optics

    Polycarbonate lens diffuses light evenly throughout space with no LED pixelation. 80° Standard beam angle.

  • Construction

    IC rated driver and fixture are tested and approved for direct contact with insulation. Plenum rated cable connector to connect from module to remote driver box. solated driver integrated inside aluminum remote box with two knockouts with slots for pryout.

  • Installation

    Designed for super shallow ceiling plenums without any housing. High strength steel spring clip for easy installation. Hole cut out template provided for accurate hole size for proper trim installation. Maximum hole size should not exceed 4 1/4″ for this product. Suitable installation for t-grid and drop ceiling applications.

  • Electrical

    Driver connects to 120-277V power supply. High Efficiency driver with a power factor > 0.9. Start time of less than .75 seconds.

  • Emergency Battery Pack

    Optional 90 minute battery pack available with test indicator switch.

  • Dimmability

    Works with 120V Triac/ELV type dimmers. Or 120/277V with 0-10V dimminability on 120/277V and Triac/ELV on 120V side. Dims down to 10%. For full list of dimmers, refer to the Dimmer Compatability List.

  • Listings

    ETL Listed for Wet Locations. IC-Rated for direct contact with insulation. Energy Star Certified. Title 24 JA8-2025-E Compliant.

  • Warranty

    5-year limited warranty.

Works with

Accessorys

Accessorys that go with this canless led

Part of these families

3 families

Downloads

IES Files

This file is not labelled with an item number, so it could not be matched to a row above.

IES photometric files are provided per item number — download them from the Item numbers table above.