4″ Double Wall New Construction IC Housing for GU10 Base
Dimensions
4 1/4" · GU10 · 50W · 120V · New Construction · Lamp: Designed for use with GU10 MR16 LED lamps
Item numbers ↓Dimensions
1 drawing · click to open full size
Item numbers
1One item number.
| Item number | Drawing |
|---|---|
| EL49ICA |  |
Details
- Double Wall IC Construction Housing for use in insulated ceilings.
- With Thermal Protector
- Trims sold separately.
- Lamp: 50W MAX 120V MR16 GU10 LED/Halogen (not included).
- Lamp Holder: MR16 GU10 socket.
Construction:
• Double wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information. Access above the ceiling is not required for servicing & repairs occurring after installation (junction box is accessible from below the ceiling).
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
Input Voltage: 120V AC. Thermally protected against improper lamping.
Trims
Compatible with ELCO 4" MR16 trims.
Dimmability
Dimmability based on lamp.
Lamp
Designed for use with GU10 MR16 LED lamps.
Listings
• UL Listed for Damp Location. • UL Listed for Wet Location with select trims. • UL Listed for Feed Through. • UL Listed for Direct Contact with Insulation and Combustible Material. • Airtight per ASTM E-283. Install a JA8-2025-E lamp/luminaire for Title 24 Compliance.
Warranty
ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years.
