Skip to content
ELCO Lighting
EL453ICDXA
4″ DX Koto™
DX Koto™ SystemHOUSING

4″ 0-10V Shallow Max. Adjustability New Construction IC Airtight Housing

Spec Sheet

4" · 120-277V · 0-10V/Triac/ELV · Shallow New Construction · Lamp: Designed for use with ELCO 4" Pex™ Twist-On Trims and 0-10V Koto™ LED module

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

1

One item number.

Item number
EL453ICDXA

Details

  • Wired for 0-10V Dimming
  • 120/277V Input
  • Integrated collar allows for use with ⅝" thick to 1 ½" thick ceilings 
  • Double Wall IC Airtight for direct contact with Insulation
  • Meets restricted air flow requirements (per ASTM E-283)
  • UL Listed (US and Canada) for direct contact with Insulation
  • UL Listed (US and Canada) for Damp Locations
  • UL Listed (US and Canada) for Wet Location with Wet Location Rated Inserts
  • UL Listed (US and Canada) for Feed Through
  • CA Title 24 Compliant

  • Construction: ​​

    • IC rated for direct contact with insulation, for use in IC or Non-IC conditions. • Housing adjusts in frame to accommodate up to 1½" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength swivel hanger bars can easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed swivel hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

  • Electrical

    Input Voltage: 120277V. Emergency Backup: The fixture becomes 120V only.

  • Dimmability

    Dimmability based on lamp.

  • Lamp

    Designed for use with ELCO 4" Pex™ Twist-On Trims and 0-10V Koto™ LED module

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.

Part of these families

1 family

Downloads