4″ 0-10V Max. Adjustability New Construction IC Airtight Housing
Dimensions
0-10V/Triac/ELV · New Construction · 2 item numbers · Lamp: Designed for use with ELCO 4" Pex™ Twist-On Trims and 0-10V Koto™ LED module
Item numbers ↓Dimensions
2 drawings · click to open full size
Item numbers
2Both 2 are the same item. Voltage and emergency option change.
| Item number | Voltage | Emergency Option | Drawing |
|---|---|---|---|
| EL485ICDXA | 120-277V | — |  |
| EL485ICDXA-EM7 | 120V | Emergency Battery Backup | — |
Details
- Wired for 0-10V Dimming
- 120/277V Input
- Integrated collar allows for use with ⅝" thick to 1 ½" thick ceilings
- Double Wall IC Airtight for direct contact with Insulation
- Meets restricted air flow requirements (per ASTM E-283)
- UL Listed (US and Canada) for direct contact with Insulation
- UL Listed (US and Canada) for Damp Locations
- UL Listed (US and Canada) for Wet Location with Wet Location Rated Inserts
- UL Listed (US and Canada) for Feed Through
- CA Title 24 Compliant
Construction:
• IC rated for direct contact with insulation, for use in IC or Non-IC conditions. • Housing adjusts in frame to accommodate up to 1½" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength swivel hanger bars can easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed swivel hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
Input Voltage: 120277V. Emergency Backup: The fixture becomes 120V only.
Dimmability
Dimmability based on lamp.
Lamp
Designed for use with ELCO 4" Pex™ Twist-On Trims and 0-10V Koto™ LED module
Warranty
ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.
