Skip to content
ELCO Lighting
3″ New Construction Housing3″ New Construction Housing3″ New Construction Housing3″ New Construction Housing
1/4
3″ GU10 Housings and Trims
Alpine™ SystemHOUSING

3″ New Construction Housing

Spec Sheet

GU10 · 12W · New Construction · 2 voltage options · Lamp: Designed for use with GU10 MR16 LED lamps

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

2

Both 2 are the same item. Voltage changes.

Item numberVoltageDrawing
EL39LDICA120V
EL39LDICA-7277V—

Details

  • Single wall IC construction, for use in insulated ceilings.
  • Dimmable.
  • Lamp: 120V, MR16 GU-10 LED (not included).
  • Lamp Holder: Twist-and-lock GU10 MR16 lampholder.
  • Trims sold separately

  • Construction: ​​

    • Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

  • Electrical

    • Input Voltage: 120V AC. • EL39LDICA-7 includes 277V to 120V step-down transformer. • Thermally protected against improper lamping.

  • Trims

    Compatible with ELCO 3" MR16 trims.

  • Lamp

    Designed for use with GU10 MR16 LED lamps.

  • Dimmability

    Dimmability based on lamp.

  • Listings

    • UL Listed (US and Canada) for Damp Location. • UL Listed (US and Canada) for Wet Location with select trims. • UL Listed (US and Canada) for Feed Through. • UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. • Airtight per ASTM E-283. • Install a JA8-2025-E lamp/luminaire for Title 24 Compliance.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years.

Part of these families

1 family

Downloads