Skip to content
ELCO Lighting
EL2699LDICA3″ New Construction Housing3″ New Construction Housing3″ New Construction Housing3″ New Construction Housing
1/5

Finish

3″ Low Voltage GU5.3 Housings and Trims
Alpine™ SystemHOUSING

3″ New Construction Housing

Spec Sheet

LED · 12W · 120V · New Construction · 2 transformer type options · Lamp: Designed for use with GU5.3 MR16 lamps

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

2

Both 2 are the same item. Transformer type changes.

Item numberTransformer TypeDrawing
EL2699LDICAMagnetic Transformer
EL2699LDICEAElectronic Transformer—

Details

  • Single wall IC construction, for use in insulated or non-insulated ceilings.
  • Dimmable.
  • Lamp: MR16 GU/GX5.3 bi-pin LED (not included).
  • Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
  • Trims sold separately.

  • Construction: ​​ •

    IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 3 3/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size pryout conduit knockouts, 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-grids. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with the joists.

  • Electrical

    • Input Voltage: 120V AC. • Output Voltage: 12V AC. • Max Wattage: 12W • Magnetic or electronic transformer available. • Thermally protected against improper lamping.

  • Trims

    Compatible with ELCO Low Voltage MR16 trims.

  • Dimmability

    • Magnetic transformer dims with MLV type dimmers. • Electronic transformer dims with ELV type dimmers. • See dimming compatibility list for a list of compatible dimmers. • Note: Lamp used may affect dimmability.

  • Lamp

    Designed for use with GU5.3 MR16 lamps.

  • Listings

    • UL Listed (US and Canada) for Damp Location. • UL Listed (US and Canada) for Wet Location with select trims. • UL Listed (US and Canada) for Feed Through. • UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. • Airtight per ASTM E-283. • Install a JA8-2025-E lamp/luminaire for Title 24 Compliance.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years.

Part of these families

1 family

Downloads