Skip to content
ELCO Lighting
3″ Low Voltage IC Airtight Housing for MR16 Bi-Pin
3″ Low Voltage GU5.3 Housings and Trims
Alpine™ SystemHOUSING

3″ Low Voltage IC Airtight Housing for MR16 Bi-Pin

Spec Sheet

GU5.3 BiPin · 2 transformer type options · Lamp: 50W MAX 12V MR16 GU/GX5.3 bi-pin Lamp Not Included. EL2699ICA Magnetic Transformer recommended for use with 20W-50W lamps only. EL2699ICEA Electronic Transformer recommended for use with 3W-50W LED or Halogen Lamps

Item numbers ↓

Dimensions

1 drawing · click to open full size

Item numbers

2

Both 2 are the same item. Transformer type changes.

Item numberTransformer TypeDrawing
EL2699ICAMagnetic Transformer
EL2699ICEAElectronic Transformer—

Details

  • Double wall IC construction, for use in insulated ceilings.
  • Trims sold separately. 
  • Lamp: 50W MAX 12V MR16 GU/GX5.3 bi-pin Lamp Not Included.

EL2699ICA Magnetic Transformer recommended for use with 20W-50W lamps only.
EL2699ICEA Electronic Transformer recommended for use with 3W-50W LED or Halogen Lamps.

  • Lamp Holder: MR16 GU/GX5.3 bi-pin socket
  • Note: Use only dimmers specifically designed for use with magnetic transformers.

  • Construction: ​​ •

    IC rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 3 3/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information. Access above the ceiling is not required for servicing & repairs occurring after installation (junction box is accessible from below the ceiling).

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size pryout conduit knockouts, 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-grids. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housing with the joists.

  • Electrical

    • Input Voltage: 120V AC. • Output Voltage: 12V AC. • Magnetic or electronic transformer available. • Thermally protected against improper lamping.

  • Trims

    Compatible with ELCO Low Voltage MR16 trims.

  • Dimmability

    • Magnetic transformer dims with MLV type dimmers. • Electronic transformer dims with ELV type dimmers. • See dimming compatibility list for a list of compatible dimmers. • Note: Lamp used may affect dimmability.

  • Lamp

    50W MAX 12V MR16 GU/GX5.3 bi-pin Lamp Not Included. EL2699ICA Magnetic Transformer recommended for use with 20W-50W lamps only. EL2699ICEA Electronic Transformer recommended for use with 3W-50W LED or Halogen Lamps.

  • Listings

    UL Listed for Damp Location. UL Listed for Wet Location with Shower trims. UL Listed for Feed Through. UL Listed for Direct Contact with Insulation and Combustible Material. Airtight per ASTM E-283. Install a JA8-2025-E lamp/luminaire for Title 24 Compliance.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years.

Part of these families

1 family

Downloads