3″ IC Airtight Remodel Housing for Koto™ Architectural LED Light Engine

Dimensions

750 - 950 - 1100 · Remodel · 2 item numbers · Lamp: Designed for use with ELCO Architectural Koto™ LED Light Engines (ELK19, ELK21, or ELK24 Series)

1 drawing · click to open full size

Both 2 are the same item. Wattage, voltage and dimming change.

Item number	Wattage	Voltage	Dimming	Drawing
E3LK65RICA	12.5W	120V	Triac/ELV
E3LK66RICAD	11.8W	120-277V	0-10V/Triac/ELV	—

IC Airtight for direct contact with insulation.
Koto™ Architectural Housing: 120V Triac/ELV.
Must be used with Architectural Koto™ LED Light Engines (ELK19, ELK21, or ELK24 Series).
Lumen output based on module.

Lamp
Designed for use with ELCO Architectural Koto™ LED Light Engines (ELK19, ELK21, or ELK24 Series).
Construction:
• Single Wall IC Rated for direct contact with insulation, for use in IC or non-IC conditions. • Housing accommodates up to 1 1/2" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation
Designed for ceiling plenums where 2x6 joists or taller joists are used. Maximum hole cutout is 3 5/8". See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts. Pry-out knockout slots. 4 Romex pryouts with strain relief.
Listings
• UL Listed (US and Canada) for Damp Location. • UL Listed (US and Canada) for Wet Location with select trims. • UL Listed (US and Canada) for Feed Through. • UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. • Airtight per ASTM E-283. • Install a JA8-2025-E lamp/luminaire for Title 24 Compliance.
Warranty
ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.