Skip to content
ELCO Lighting
EL386ICDXA
3″ DX Koto™
DX Koto™ SystemHOUSING

3″ 0-10V MAX. Adjustability IC Airtight New Construction Housing

Spec Sheet

0-10V/Triac/ELV · New Construction · 2 item numbers · Lamp: Designed for use with ELCO 3" Koto Twist-On Trims and DX Koto™ LED module

Item numbers ↓

Dimensions

2 drawings · click to open full size

Item numbers

2

Both 2 are the same item. Voltage and emergency option change.

Item numberVoltageEmergency OptionDrawing
EL386ICDXA120-277V—
EL386ICDXA-EM7120VEmergency Battery Backup

Details

  • Wired for 0-10V Dimming, 120/277V Input
  • Integrated collar allows for use with ⅝" thick to 1 ½" thick ceilings
  • Double Wall IC Airtight for direct contact with Insulation
  • Meets restricted air flow requirements (per ASTM E-283)
  • UL Listed for direct contact with Insulation, UL Listed for Damp Locations, UL Listed for Wet Location with Wet Location Rated Inserts, UL Listed for Feed Through, CA Title 24 Compliant

  • Construction: ​​

    • IC rated for direct contact with insulation, for use in IC or Non-IC conditions. • Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness. • Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. • Steel housing for greater heat dissipation. Stamped galvanized steel frame.

  • Installation

    Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength swivel hanger bars can easily be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

  • Junction Box

    Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.

  • Hanger Bars

    Pre-installed swivel hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

  • Electrical

    Input Voltage: 120/277V.

  • Emergency Backup

    The fixture becomes 120V only.

  • Dimmability

    Dimmability based on lamp.

  • Lamp

    Designed for use with ELCO 3" Koto Twist-On Trims and DX Koto™ LED module

  • Listings

    UL Listed for direct contact with Insulation, UL Listed for Damp Locations, UL Listed for Wet Location with Wet Location Rated Inserts, UL Listed for Feed Through, CA Title 24 Compliant. Airtight per ASTM E-283.

  • Warranty

    ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years.

Part of these families

1 family

Downloads