2″ IC Airtight New Construction Housing, Double Wall

Installation

Designed for shallow ceiling plenums where 2x6 joists or taller are used. High strength hanger bars can easily be nailed to joists. Maximum hole cutout is 2 5/8″. Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

Junction Box

Positioned to accommodate straight conduit runs. Three 1/2″ trade size pry-out knockouts, One 3/4″ knockout, One 1/4″ knockout. Four Romex pry-outs with strain relief for easy Romex installation. Strain clamps to install or remove covers for easy access and grounding.

Hanger Bars

Pre-installed hanger bars with True Nail easy installation in regular lumber, engineered lumber, and Laminated Beams. Integral T-bar slots for easy installation in T-Bars. Spans up 24″ and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.

Electrical

Driver connects to 120V power supply. High Efficiency driver with a power factor > 0.9.

Emergency Battery Pack

Optional 90 minute battery pack available with test indicator switch. Note that double wall housings require Access From Above Ceiling for Battery Maintenance.

Dimmability

Works with 120V Triac and ELV type dimmers. Dims down to 10%. For full list of dimmers refer to the Dimmer Compatibility List.

Trims

Compatible with - E210C06, E213C06, E214C06, E215C06, E218C06, E219C06 series.

Listings

UL Listed (US and Canada) for Wet Location. UL Listed (US and Canada) for Direct Contact with Insulation and Combustible Material. UL Listed (US and Canada) for Feed Through. Meets restricted airflow requirements (per ASTM E-283). California Title 24 (JA8-2025-E).

Warranty

ELCO Products are built to last with a 5-year Limited warranty.